技术服务

• Disconnect all power connections before installation.
• Use appropriate personal protective equipment.
• Ensure the working area is dry and well-ventilated.
• The installation should be carried out only by qualified technicians.

Open the packaging box and check if all components are complete. The standard packaging should include:

• Main unit device x1
• Power adapter x1
• Installation bracket x2
• Screw package x1
• User manual x1
• Warranty card x1

When selecting a suitable installation location, the following factors should be considered:

• The ambient temperature of the device should be between 0°C and 40°C.
• Avoid direct sunlight and humid environments.
• Ensure there is enough space for heat dissipation and maintenance.
• Keep a distance of at least 30cm from other electronic devices.

Use the provided screws to fix the installation bracket in the predetermined position:

1. Mark the drilling position.
2. Drill holes with a Φ6mm drill bit.
3. Insert the expansion tube.
4. Fix the bracket with screws.

Tip: Use a level to ensure the bracket is installed horizontally, with a deviation of no more than ±1°.

Mount the device on the installed bracket and connect all necessary cables:

Wiring Schematic Diagram

Red: Power Cable Green: Data Cable Gray: Ground Cable